LEDlink's custom LED display panels make a great contribution to enriching our visual space and lighting up a better life. Of course, there are many precautions to take when installing them, and LEDlink is going to introduce them in detail today.

Lightning Protection

Regarding the lightning protection measures for the installation of the building and the screen body, in order to prevent a strong electromagnetic attack caused by lightning, the screen body and the outer protective layer of the display screen must be grounded, and the resistance of the grounding line should be less than 3 ohms. This allows the current caused by lightning to be discharged in a timely manner through the ground wire.

Water, dust, and moisture-proof

The entire screen body must be waterproof, dustproof, and moisture-proof. The connection between the box and the screen body, as well as the connection between the screen body and the installation object, must be seamless to prevent water leakage and moisture. The internal of the screen body must have good drainage and ventilation measures. If there is water accumulation inside, it can be dealt with in a timely manner.

Circuit design

Regarding the selection of circuit chips, in some parts of the world, the temperature can reach around minus ten degrees Celsius or even lower in winter. Therefore, when selecting circuit chips, industrial-grade chips with a working temperature range of minus 40 to 80 degrees Celsius must be chosen to avoid the situation where the display screen cannot be started due to low temperature.

The protection of the LED panel body

The screen body generates a certain amount of heat during operation. If this heat is not discharged, when it accumulates to a certain degree, it will cause the internal environment temperature to be too high, which can affect the operation of the integrated circuits, and can even cause burnout, resulting in the display screen being unable to operate. Therefore, good ventilation and heat dissipation measures must be taken inside the screen body, and the internal environment temperature should be kept between minus 10 degrees to 40 degrees Celsius.

Careful selection of LED lamps

The selection of high-brightness LED lamps can ensure good display effects even in direct sunlight. It can also enhance the contrast with the surrounding environment, making the audience wider, and can still perform well in distant and wide-angle locations.

Safety always matters

LEDlink's custom LED display panels are not only visually stunning but also designed with safety in mind. Their display panels come equipped with lightning protection measures to protect against strong electromagnetic attacks caused by thunderstorms. In conclusion, LEDlink's LED display panels are designed with safety as a top priority. Our lightning protection measures, waterproof and moisture-proof designs, temperature-resistant chips, and efficient ventilation systems make our LED displays a safe and reliable option for any application. Visit LEDlink's official website to learn more about our products and services.